CR Package Release Notes File.


——————————————————————————————————————————————————
v.1.0 - First public release (Max package manager)
——————————————————————————————————————————————————

1. Updated examples/demos and the readme file.
2. Added license and copyright details in package description (for package manager) and the source code.
3. Version number changed (removed middle number for university-only releases, as all releases are public from this point onwards.


—————————————————————————————————————————————————
v.0.1.0 (also v.0.0.5) - First University Release
—————————————————————————————————————————————————

1. Swapped Messages: Pins, Config.
	Pins - Prints out possible configuration for each pin.
	Config - Prints out to console for every pin its setup mode.

2. Removed the console feedback ‘close: board was not connected’. 
	Now it will only appear after sending 'close' message 
	(instead of after each 	object delete).

3. Replaced attributes DIGITAL with @digital, etc.. for every mode.

4. Added missing digital pins 0,1 to boardin and boardout. 

5. Updated all docs, reference pages, help patches, extras demos and examples 
	to reflect the new messages added.


———————————————————————————
v.0.0.4
———————————————————————————

1. Added Messages: Pins, Ports, Config.
	Pins - Prints out to console for every pin its setup mode.
	Ports - Lists available port (replaced message ‘Print’). 
	Config - Prints out possible configuration for each pin.

2. Removed all boardin/boardout attributes from Max’s Inspector Window.

3. Fixed stability issues in version 0.0.3 (due to open/close connection to board).

4. Added range values to the assist messages (mouse hover over inlets/outlets).

5. Fixed version number and overview page link in the Max Package Manager page.

6. Added console messages as feedback to user (after open/close).


———————————————————————————
v.0.0.3
———————————————————————————

1. Added Messages: Open, Close, Test.
	Open - Opens a connection to the board.
	Close - Closes the connection to the board. 
	Test - Performs test to diagnose connection issues (and board blinks).

2. Separated the creation of boardin/boardout objects from the board connection, so that 	multiple sketches with boardin and boardouts can be open at the same time without 	disconnecting each other.

3. Replaced analog pins reference from 20-25 to A0-A5.

4. Updated all docs, refs, help patches and examples to reflect the changes in this 		release.

5. Added all examples to ’Extras’ menu (Extras->cr).

6. Removed 2 duplicated example patchers under /examples
	<example01_v02.maxpat>
	<example02_v01.maxpat> 


———————————————————————————
v.0.0.2
———————————————————————————

1. CR Image file icon.png replaced with a newer version of the Creative Robotics Lab.
2. Added 2 example patchers under /examples
	<example01_v02.maxpat>
	<example02_v01.maxpat> 
3. Changed PIN numbers. Instead of pin# 0-19, it’s now 0-13 (digitals), 20-25 (analogs). 
	All demo and example files corrected with the new PIN numbers.
4. Added support for the following sensors:
	LED, RGB LED, Pushbutton, Potentiometer, Temperature Sensor, 
	Tile Sensor, Flex Sensor, Servo Motor, Sharp IR Distance Sensor,
	DC Motor.
5. Added images (Arduino circuits) for each Demo file. 
	All images are also include under folder /examples/images. 
6. Updated installation instructions in file readme.md (steps 2-4).
7. Added file version.md .
8. Added to SERVO Mode also Analog pins option (pins A0-A5). 
	Previously SERVO could only use Digital Pins (D0-D13). 
9. Added 5 example patchers under folder /examples (corrected analog PIN numbers)
	<example01_continuousAndDiscrete.maxpat>
	<example02_analog.maxpat>
	<example03_digital.maxpat>
	<example04_pwm.maxpat>
	<example05_servo.maxpat>


——————————————————————————————————————————————
Version numbers explained <v.Major.Mid.Minor>
Major: Public releases
Mid: University releases
Minor: Internal releases 
